ArF/KrF
Category: High-end wafer photoresist products
Product details
| Product | Introduction | Key Performance Description |
| KrF photoresist | KrF photoresist uses krypton fluoride (KrF) laser (wavelength 248nm) as the exposure light source. It is formulated with film-forming resin, photoacid, solvent and additives, and has the advantages of high resolution and etch resistance. It is mainly used in semiconductor lithography processes with line widths above 0.13μm. The KrF photoresist products currently developed by our company are applicable to processes including Poly, AA, Metal, Implant, Contact Hole, Via, etc., and their application fields include memory, logic, and CIS characteristic processes (high aspect ratio applications). | Film thickness: 100-5000nm CD ≥120nm |
| Immersion ArF photoresist | Immersion ArF photoresist uses argon fluoride (ArF) laser (wavelength 193nm) as the exposure light source, mainly used in integrated circuit manufacturing technology nodes below 45nm. The immersion ArF photoresist products developed by our company include positive tone development (PTD) and negative tone development (NTD) types, applicable to processes including Poly, Metal, Contact Hole, Via, etc. Their application fields involve memory (3D NAND, DRAM) and high-performance logic devices. | Film thickness: 50-200nm CD ≥37.5nm |
Keywords:ArF/KrF
Previous: No more!
Next: No more!
ArF/KrF
Semicondcutor photoresists are critical materials in the semiconductor lithography process. During lithography, after steps such as coating, pre-baking, exposure, post-exposure baking, and development, the circuit pattern can be transferred from the mask to the photoresist, and then to the silicon wafer through etching. With the shrink of line width in integrated circuits and the improvement of integration, the technical difficulty of photoresist R&D has increased significantly, becoming one of the key technologies to continue Moore's Law.
Related products
Integrated circuit materials
CMP Pad
-
CMP Pad
CMP Pad is a technology-intensive product that spans multiple disciplines such as polymer chemistry, polymer physics, organic synthesis, fluid mechanics, tribology, and precision machining.
-
CMP Slurry
CMP Slurry is a colloid with uniformly dispersed particles. It can form an oxide film on the surface of silicon wafers, which is then removed by the abrasive particles in the slurry to achieve the polishing effect. Generally, factors such as the flow rate, viscosity, temperature, composition, and pH value of the slurry will affect the removal effect.
-
CMP Chemical
It is mainly used to remove impurities such as dust particles, organic substances, inorganic substances, metal ions, and oxides remaining on the surface of wafers. It meets the extremely high cleanliness requirements of integrated circuit manufacturing and plays an important role in the yield rate of wafer production.
Advanced semiconductor packaging
-
Advanced Packaging PSPI
GHI-line exposure<br> Resolution: 5~10 μm<br> Curing in high/low-temperature<br> Film thickness: 5~15 μm<br> Curing temperature: 200~400 °C<br> Superior mechanical/electrical properties and adhesion to copper
-
Temporary Bonding Adhesive(TBA)
Bonding at room temperature and low stress<br> Excellent high-temperature resistance<br> (withstands long-term exposure to 300°C for > 1.5 hours)<br> Debonding achievable via mechanical or laser methods (248nm/308nm/355nm)
-
Wafer-Level Insulating Passivation Layers
Wafer-Level Passivation Layers (PI/PSPI) are critical materials utilized in Wafer-Level Packaging (WLP) processes. Applied via spin coating and patterned through exposure and development, they form a permanent, patterned protective layer. Following high-temperature curing, these layers provide excellent passivation protection and stress buffering for the chip surface, effectively enhancing device reliability.
Semiconductor display materials
OLED
-
YPI
Viscosity: 4000~7000 cP<br> Nonvolatile matter: 10%~20%<br> Film thickness: 5~15 μm<br> Curing Temperature: 450~480 ℃<br> 1% weight loss temperature: >560 ℃<br> Superior optical/mechanical properties
-
PSPI
GHI-line exposure<br> Resolution: 2~3 μm<br> High/low-sensitivity PSPI<br> Film thickness: 1~5 μm<br> Curing temperature: 250~280 °C<br> Superior optical/mechanical properties
-
TFE INK
Viscosity: 20~22 cP<br> Water content: <50 ppm<br> UV curing wavelength: 395 nm<br> Film thickness: 6~15 μm<br> Superior optical properties
-
BPDL
Resolution: 5 μm<br> Particle size: 50~70 nm<br> Curing temperature: 250~280 °C<br> Film thickness: 1~5 μm<br> Optical density (OD): >1 /μm
-
PFAS free PSPI
GHI-ine exposure<br> Resolution: 2~3 μm<br> High/low-sensitivity PFAS free PSPI<br> Film thickness: 1~5 μm<br> Curing temperature: 250~280 °C<br> Superior optical/mechanical properties
MICRO-LED
-
PSPI
GHI-ine exposure<br> Resolution: 3 μm<br> Film thickness: 1~5 μm<br> Curing temperature: 250~280 °C<br> multiple curing processes/good adhesion to metal substrates<br> Superior optical/mechanical properties
-
Black Bank
Resolution: 10 μm<br> Film thickness: 3~8 μm<br> Curing temperature: 150~250 °C<br> Optical density (OD): >1 /μm
General consumables for printing and copying
Online message
Leave the information you want to consult, and we will contact you as soon as possible