CMP Pad
Category: CMP Pad
Product details
| Product | Introduction |
| Polishing hard pad for IC | Polishing hard pads are critical consumables in semiconductor manufacturing, enabling global planarization at the nanoscale by combining chemical corrosion and mechanical abrasion. |
| Polishing soft pad for IC/SDO | Polishing soft pads are critical consumables in semiconductor manufacturing, mainly used for fine polishing and final polishing. Compared to hard pads, soft pads exhibit superior surface conformity, enabling enhanced adaptation to wafer topography, which minimizes micro-scratches and achieves higher surface smoothness. |
| Advanced polishing Pad for Third-Generation Semiconductors | These advanced polishing pads are specifically designed for third-generation semiconductors to achieve nanoscale flatness through the synergistic effect of chemical corrosion and mechanical abrasion. Due to the high hardness of SiC and GaN (the Mohs hardness of SiC reaches 9.5), traditional polishing pads struggle to meet requirements. Therefore, special materials and structural designs are adopted to balance hardness and flexibility, thereby reducing wafer-surface defects. |
Keywords:CMP Pad
Previous: No more!
Next: CMP Slurry
CMP Pad
CMP Pad is a technology-intensive product that spans multiple disciplines such as polymer chemistry, polymer physics, organic synthesis, fluid mechanics, tribology, and precision machining.
Related products
Integrated circuit materials
CMP Pad
-
CMP Pad
CMP Pad is a technology-intensive product that spans multiple disciplines such as polymer chemistry, polymer physics, organic synthesis, fluid mechanics, tribology, and precision machining.
-
CMP Slurry
CMP Slurry is a colloid with uniformly dispersed particles. It can form an oxide film on the surface of silicon wafers, which is then removed by the abrasive particles in the slurry to achieve the polishing effect. Generally, factors such as the flow rate, viscosity, temperature, composition, and pH value of the slurry will affect the removal effect.
-
CMP Chemical
It is mainly used to remove impurities such as dust particles, organic substances, inorganic substances, metal ions, and oxides remaining on the surface of wafers. It meets the extremely high cleanliness requirements of integrated circuit manufacturing and plays an important role in the yield rate of wafer production.
Advanced semiconductor packaging
-
Advanced Packaging PSPI
GHI-line exposure<br> Resolution: 5~10 μm<br> Curing in high/low-temperature<br> Film thickness: 5~15 μm<br> Curing temperature: 200~400 °C<br> Superior mechanical/electrical properties and adhesion to copper
-
Temporary Bonding Adhesive(TBA)
Bonding at room temperature and low stress<br> Excellent high-temperature resistance<br> (withstands long-term exposure to 300°C for > 1.5 hours)<br> Debonding achievable via mechanical or laser methods (248nm/308nm/355nm)
-
Wafer-Level Insulating Passivation Layers
Wafer-Level Passivation Layers (PI/PSPI) are critical materials utilized in Wafer-Level Packaging (WLP) processes. Applied via spin coating and patterned through exposure and development, they form a permanent, patterned protective layer. Following high-temperature curing, these layers provide excellent passivation protection and stress buffering for the chip surface, effectively enhancing device reliability.
Semiconductor display materials
OLED
-
YPI
Viscosity: 4000~7000 cP<br> Nonvolatile matter: 10%~20%<br> Film thickness: 5~15 μm<br> Curing Temperature: 450~480 ℃<br> 1% weight loss temperature: >560 ℃<br> Superior optical/mechanical properties
-
PSPI
GHI-line exposure<br> Resolution: 2~3 μm<br> High/low-sensitivity PSPI<br> Film thickness: 1~5 μm<br> Curing temperature: 250~280 °C<br> Superior optical/mechanical properties
-
TFE INK
Viscosity: 20~22 cP<br> Water content: <50 ppm<br> UV curing wavelength: 395 nm<br> Film thickness: 6~15 μm<br> Superior optical properties
-
BPDL
Resolution: 5 μm<br> Particle size: 50~70 nm<br> Curing temperature: 250~280 °C<br> Film thickness: 1~5 μm<br> Optical density (OD): >1 /μm
-
PFAS free PSPI
GHI-ine exposure<br> Resolution: 2~3 μm<br> High/low-sensitivity PFAS free PSPI<br> Film thickness: 1~5 μm<br> Curing temperature: 250~280 °C<br> Superior optical/mechanical properties
MICRO-LED
-
PSPI
GHI-ine exposure<br> Resolution: 3 μm<br> Film thickness: 1~5 μm<br> Curing temperature: 250~280 °C<br> multiple curing processes/good adhesion to metal substrates<br> Superior optical/mechanical properties
-
Black Bank
Resolution: 10 μm<br> Film thickness: 3~8 μm<br> Curing temperature: 150~250 °C<br> Optical density (OD): >1 /μm
General consumables for printing and copying
Online message
Leave the information you want to consult, and we will contact you as soon as possible